ESAB MultiPower 460 Pulse Manuál s instrukcemi stáhnout pdf (Strana 11)

Table 2-1. Specifications for MultiPower 460

2.0. GENERAL

Before the MultiPower 460 power source is put into operation, the safety

section at the front of this manual should be read completely. This will help

avoid possible injury due to misuse or improper installation.

The definitions relating to the safety notations below:

are described at the end of the Safety Section in the front of this manual —

read them and their specific text references carefully.

2.1. DESCRIPTION

This manual has been prepared for use by an experienced operator. It

provides information to familiarize the operator with the design, installation

and operation of the MultiPower 460 power source. DO NOT attempt to install

or operate this equipment until you have read and fully understood these

instructions. The information presented here should be given careful consid-

eration to ensure proper installation and optimum weld performance of this

equipment.

OPEN CIRCUIT VOLTAGE (U

) 80V DC Max.

RATED

OUTPUT

DUTY CYCLE 60% 100%

Current (I

)500 A450 A

Voltage (U

) 40 V 38 V

RATED

INPUT

3 Phase

60 Hz

Volts (U

) Current (I

) Flat Current (I

) Flat

208/230 V 76 A 66 A

460 V 38 A 33 A

575 V 31 A 26 A

50 Hz

220 V 79 A 68 A

400 V 43 A 37 A

Power Factor at Rated Output 89%

Welding Range 10 A/12 V - 500 A/40 V

Auxiliary Power 115 V ac @ 10 A, 60 Hz

PHYSICAL SPECIFICATIONS

Height (without lift eye) 25.0" (62.2 cm)

Width 18.8" (48.3 cm)

Depth 32.5" (81.9 cm)

Net Weight 322lbs (146 kg)

Shipping Weight 375lbs (170 kg)

SECTION 2

DESCRIPTION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Komentáře k této Příručce

Žádné komentáře

ESAB MultiPower 460 Pulse Manuál s instrukcemi Strana 11

Komentáře k této Příručce

Související produkty a manuály pro Svařovací systém ESAB MultiPower 460 Pulse